LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Crankshaft Position >> Removal >> Removal

Sensor, Crankshaft Position: Removal: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the flexplate. Refer to FLEXPLATE, REMOVAL .
    Fig 1: Crankshaft Position Sensor Connector
    GC0146607Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Crankshaft Position (CKP) sensor wiring harness connector (1).
    Fig 2: Crankshaft Position Sensor Wiring Harness Bracket & Bolts
    GC0146606Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolts attaching the harness connector bracket to the oil pan.
    Fig 3: Crankshaft Position Sensor & Bolt
    GC0146603Courtesy of CHRYSLER GROUP, LLC
  5. Remove the bolt (1) and the CKP sensor (2).
scientia non olet · About LEMON Manuals