Outlet, Power, 115 V: Installation: Installation

Fig 1: Electrical Connector & 115v Power Outlet

Courtesy of CHRYSLER GROUP, LLC

1. Insert the 115v outlet into the panel.
2. Connect the electrical connector (1) to the 115v power outlet (2).
   Fig 2: Rear Center Console Bezel & Retainers

   Courtesy of CHRYSLER GROUP, LLC
3. Install the duct to the trim panel.
4. Install the rear console trim panel.
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.