LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Compass 75th Anniversary Edition, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Fuel System) >> Fuel Injection, 2.8L Diesel >> Sensor, Intake Air Pressure >> Installation >> Installation

Sensor, Intake Air Pressure: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Intake Air Pressure & Mass Air Flow Sensor
GC0086103Courtesy of CHRYSLER GROUP, LLC
  1. Check condition of sensor O-ring.
  2. Position Inlet Pressure Sensor (3) into top of air cleaner cover (1) with a slight twisting action.
  3. Install mounting screws.
  4. Install Inlet Pressure Sensor electrical connector.
scientia non olet · About LEMON Manuals