Crankshaft Position Sensor: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Position Sensor & Bolt

Courtesy of CHRYSLER GROUP, LLC

Install the crankshaft position sensor (1). Tighten bolt (2) to 8 N.m (71 in. lbs).

Fig 2: Crankshaft Position Sensor Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Connect the crankshaft position sensor wire harness connector (1).

Fig 3: Upper Charge Air Tube, Lock Ring, Lower Charge Air Tube, Clamp & Charge Air Cooler (CAC) Inlet
Courtesy of CHRYSLER GROUP, LLC
Connect the lower charge air tube (3) from the charge air cooler (CAC) inlet (5) and securely tighten clamp (4).
Install the lower charge air tube (3) to the upper charge air tube (1) to turbocharger and lock the lock ring in place.
Install the negative battery cable.