LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Cherokee Trailhawk, 3.2L Eng VIN S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.0L Diesel

2.0L Diesel

Fig 1: Cooling Temperature Sensor & Wire Harness Connector
GC0159853Courtesy of CHRYSLER GROUP, LLC
  1. Install the Engine Cooling Temperature (ECT) sensor (2) to cylinder head and tighten to the proper SPECIFICATIONS .
  2. Connect the ECT sensor wire harness connector (1).
  3. Install the engine cover. .
  4. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals