Module, Adaptive Cruise Control: Removal: Removal

Fig 1: Identifying ACC Module, Connector, Fasteners & Screws

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Raise and support the vehicle.
3. Remove the wire harness to ACC bracket routing fasteners (2).
4. Disconnect the electrical harness from the electrical connector (3) of the ACC module assembly (4).
5. Remove two bolts (1) securing the ACC module assembly bracket to the support cross bracing.
6. Remove the ACC module assembly with bracket from the vehicle to bench.
7. Remove the four retainers that secure the ACC module assembly to the ACC bracket.