LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Patriot Limited, FWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Engine Cooling System) >> Engine >> Engine Block Heater >> Installation >> Installation

Engine Block Heater: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Thoroughly clean bore hole.
  2. Insert block heater assembly into bore.
  3. Install retaining clip.
  4. Connect power cord to block heater.
    Fig 1: Air Cleaner Inlet
    GC0098469Courtesy of CHRYSLER GROUP, LLC
  5. Install air intake inlet.
  6. Install engine cover.
scientia non olet · About LEMON Manuals