Module, Body Control: Installation: Installation

Fig 1: BCM & Fasteners

Courtesy of CHRYSLER GROUP, LLC

NOTE: Illustration shows the BCM completely uncovered for clarity purposes.

1. Install the BCM to the mounting bracket.
2. Install all the fasteners (2) to secure the BCM to the bracket.
3. Connect all harness connectors to the BCM assembly.
   Fig 2: Scuff Plate & Screws

   Courtesy of CHRYSLER GROUP, LLC
4. Install the passenger side lower cowl panel (1).
5. Install the passenger side lower dash closeout panel.
6. Connect the negative battery cable to the proper battery post.
7. Using the scan tool, perform the Body Verification Test. Refer to STANDARD PROCEDURE .