LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal >> Removal

Sensor, Boost Pressure: Removal: Removal

  1. Disconnect and isolate the negative battery cable.
    Fig 1: Engine Cover
    GC0146436Courtesy of CHRYSLER GROUP, LLC
  2. Remove the engine cover (1).
    Fig 2: Intake Air Temperature Sensor/Boost Pressure Sensor, Fastener & Connector
    GC0146601Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the boost pressure sensor wire harness connector (1).
  4. Remove the fastener (3), and the boost pressure sensor (2).
scientia non olet · About LEMON Manuals