LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, FWD, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Removal >> Cooling Fan - Removal

Cooling Fan - Removal

WARNING:

Do not open the radiator draincock with the system hot and under pressure because serious burns from coolant can occur.

Fig 1: Upper Radiator Closure Panel
GC0137788Courtesy of CHRYSLER GROUP, LLC
  1. Remove the air intake duct.
  2. Disconnect negative cable from battery.
  3. Drain the coolant just below the upper radiator hose.
  4. Remove the upper radiator closure panel (2). Refer to PANEL, CLOSURE, UPPER, REMOVAL .
  5. Remove the hood latch cable.
    Fig 2: Upper Core Support Seal Push Pins & Radiator Core Support Bolts
    GC0137790Courtesy of CHRYSLER GROUP, LLC
  6. Remove the upper core support seal push pins (3).
  7. Remove radiator core support bolts (1).
    Fig 3: Radiator Fan Assembly
    GC0083982Courtesy of CHRYSLER GROUP, LLC
  8. Remove the upper radiator hose support bracket (2).
  9. Remove the upper radiator hose from the radiator and position aside.
  10. Remove the wiring harness from the fan shroud.
  11. Disconnect radiator fan electrical connectors.
  12. Remove radiator fan module (1) by lifting up from the engine compartment.
    Fig 4: Lower, Fan Blade Retaining Nut & Fan Motor
    GC0137791Courtesy of CHRYSLER GROUP, LLC
  13. Remove the lower (8) shroud seal.
  14. Remove the fan blade retaining nut (4) from the fan motor.
  15. Remove the fan motor (5) assembly from the shroud.
scientia non olet · About LEMON Manuals