Diagnostic Test

CHECK FOR ACTIVE DTCS 

1. With the scan tool, read the active WIN DTCs.
2. Cycle the ignition switch from off to on at least 3 times, leaving the ignition on for a minimum of one minute per cycle.
3. With the scan tool, read the active WIN DTCs.

   Does the scan tool display: U0001-CAN C BUS as active?

   Yes 

   • Refer to  2.0L & 2.4L - DIAGNOSTIC CODE INDEX  and perform the U0001-CAN C Bus diagnostic procedure.

   No 

   • Refer to  STORED LOST COMMUNICATION DTCS  and perform the Stored Lost Communication DTCs diagnostic procedure.