LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, FWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Audio/Video/Entertainment/Connectivity (Service Information) - MK) >> Switch, Remote Radio >> Installation

Switch, Remote Radio: Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

On vehicles equipped with airbags, refer to electrical, restraints before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.

  1. Install remote radio switch to the steering wheel.
  2. Connect the wire harness to the remote radio switch.
  3. Install the speed control/EVIC switch bezel. Refer to SWITCH, SPEED CONTROL, INSTALLATION .
  4. Install the driver side airbag. Refer to AIR BAG, DRIVER, INSTALLATION .
  5. Connect the battery negative cable.