Sensor, Crankshaft Position: Removal: Removal
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - MOUNTING BOLT |
| 2 - CKP SENSOR |
| 3 - O-RING |
The Crankshaft Position (CKP) sensor (2) is mounted into the right rear side of the cylinder block. It is positioned and bolted into a machined hole.
- Raise vehicle.
- Disconnect sensor electrical connector.
- Remove sensor mounting bolt (1).
- Carefully twist sensor from cylinder block.
- Check condition of sensor o-ring (3).