Pedal, Accelerator: Removal: Removal

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accelerator Pedal - Without Accelerator Pedal Position Sensor

Courtesy of CHRYSLER GROUP, LLC

The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly including the bracket.

Disconnect electrical connector (3) at APPS.
Remove two accelerator pedal mounting bracket nuts (2).
Remove accelerator pedal/APPS assembly (1) from vehicle.