LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, FWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Power Transfer Unit (Service Information)) >> Seals, End Cover >> Installation >> Installation

Seals, End Cover: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Install Carrier Cover Inner Seal
GC0084415Courtesy of CHRYSLER GROUP, LLC
  1. Install the inner seal into the PTU cover using Installer (special tool #9852, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
    Fig 2: Install Carrier Cover Outer Seal
    GC0084416Courtesy of CHRYSLER GROUP, LLC
  2. Install the outer seal into the PTU cover using Installer (special tool #9853, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
    Fig 3: Side Cover
    GC0084401Courtesy of CHRYSLER GROUP, LLC
  3. Install the side cover.
  4. Tighten side cover bolts (1) to 23 N.m (17 ft. lbs.).
  5. Install the right halfshaft. Refer to INSTALLATION or INSTALLATION or INSTALLATION .
scientia non olet · About LEMON Manuals