Sensor, Boost Pressure: Removal: Removal

WARNING: This page is about a different car, the 2014 Jeep Patriot and 2014 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Remove the engine cover (1).

Fig 2: Mixing Chamber, Harness Connector, Boost Pressure Sensor & Bolts
Courtesy of CHRYSLER GROUP, LLC
Disconnect the boost pressure sensor wire harness connector (2).
Remove bolts (4) and the boost pressure sensor (3) from the mixing chamber (1).