Sensor, Fuel Pressure: Installation: Installation

WARNING: This page is about a different car, the 2014 Jeep Patriot and 2014 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Rail & Fuel Rail Pressure Sensor

Courtesy of CHRYSLER GROUP, LLC

Install the fuel rail pressure sensor (2) onto fuel rail (1). Tighten sensor (2) to 35 N.m (26 ft. lbs.).

Fig 2: Lock Tabs & Engine Wire Harness
Courtesy of CHRYSLER GROUP, LLC
Position the wire harness (2) and push down to lock tabs (1).

Fig 3: Fuel Rail Pressure Regulator Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Connect the fuel rail pressure sensor wire harness connector (2).

Fig 4: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).
Connect the negative battery cable.