LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, FWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Fuel System) >> Fuel Delivery, Diesel >> Fuel Pressure Regulator >> Installation >> Installation

Fuel Pressure Regulator: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Rail Pressure Sensor Harness Connector
GC0138069Courtesy of CHRYSLER GROUP, LLC
  1. Install the fuel rail pressure sensor (2) onto fuel rail (3). Tighten to 35 N.m (26 ft. lbs.).
  2. Connect the fuel rail pressure sensor harness connector (1).
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals