Module, Heated Seat: Installation: Installation
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The heated seat module mounting tab can be damaged during module service. Use care when removing the mounting tab from the seat pan to help prevent tab breakage. Properly align the mounting tab to the seat pan during installation.
- Position the heated seat module (3) to the front seat and connect the wire harness connector (4) to the module.
- Position the heated seat module mounting tab (2) to the hole in the seat pan (1). Firmly apply even pressure until the mounting tab is fully engaged to the seat pan.
- Reconnect the negative battery negative.
- Check for proper heated seat system operation.