When Monitored

Ignition voltage is above a calibrated value.

Power signal diagnostic is enabled and reports a normal state.

Shift is not in progress.

Time passed from gear shift is greater than or equal to a calibrated threshold.

Turbine (Input) speed sensor error is not detected.

Output speed sensor error is not detected.

Transmission fluid temperature sensor error is not detected.

No Engine speed error detected.

No EMS CAN error detected.

No BCM CAN error detected.

No CAN bus off error detected.

Engine speed is greater than or equal to threshold.

Turbine speed is greater than or equal to threshold.

Output speed is greater than or equal to threshold.

Not in neutral control state.

Transmission fluid temperature is greater than or equal to threshold.

Engine is running.