LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 345 ((Transmission Control Module (TCM) - Electrical Diagnostics - CVT Automatic Transmission)) >> DTC Troubleshooting >> P0730-Incorrect Gear Ratio >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Jeep Patriot and 2014 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

If the difference between the transmission estimated pulley speed and the measured primary pulley speed is greater than 1000 RPM (belt slipping) for the continuous period of 5.0 seconds.

scientia non olet · About LEMON Manuals