Diagnostic Test
WARNING: This page is about a different car, the 2014 Jeep Patriot and 2014 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
DETERMINING IF DIAGNOSTIC TROUBLE CODE (DTC) IS CURRENT
- With a scan tool, read and record DTCs.
- With the scan tool, clear DTCs.
- Turn the ignition off and remove the key from the ignition.
- Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
- Disarm the VTSS.
- Using the scan tool, read ITM DTCs.
Does the DTC reset?
Yes
- Replace the Intrusion Transceiver Module in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- DTC is not active at this time. Test complete.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .