LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control >> Operation >> Operation >> Pcm Operating Modes >> Limp-In Mode

Limp-In Mode

WARNING: This page is about a different car, the 2014 Jeep Patriot and 2014 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

If there is a fault detected with the accelerator pedal position sensor, the PCM will set the engine speed at 1100 RPM.