LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 ((Transmission Control Module (TCM) - Electrical Diagnostics - Continuously Variable Transmission (CVT))) >> DTC Troubleshooting >> P0716-Input Speed Sensor 1 Circuit Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

the below conditions must be present for the period of 5 seconds for the DTC to set: 

Engine speed minus the primary speed is greater than 1000 rpm.

Secondary speed multiplied by the estimated ratio, minus the Primary speed is greater than 1000 rpm.

Engine speed minus the Secondary speed, multiplied by the estimated ratio is less than 1000 rpm.