Diagnostic Test

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

DETERMINING IF DIAGNOSTIC TROUBLE CODE (DTC) IS CURRENT
1. With a scan tool, read and record DTC.
2. With the scan tool, clear DTC.
3. Turn the ignition off and remove the key from the ignition.
4. Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
5. Disarm the VTSS.
6. Using the scan tool, read ITM DTC.
  Does the DTC reset?
  
  Yes
  - Using the scan tool under Miscellaneous functions initialize the Intrusion Transceiver Module.
  - Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.
  No
  - DTC is not active at this time. Test complete.
  - Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.