LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Electronic Control Modules (Service Information)) >> Module, All Wheel Drive Control >> Installation >> Installation

Module, All Wheel Drive Control: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: AWD Control Module
GC0098485Courtesy of CHRYSLER LLC
  1. Position the All-Wheel Drive Module (1) onto the studs.
  2. Install and securely tighten the All-Wheel Drive Module nuts (2).
  3. Connect the All-Wheel Drive Module wire harness connector (3).
scientia non olet · About LEMON Manuals