Plug, Glow: Installation: Installation
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a small amount of clean diesel oil or motor oil to glow plug threads.
- Attach a flexible tool such as a rubber hose to install glow plug into cylinder head. Tighten each plug to 14 N.m (124 in. lbs.).
- Connect glow plug wiring harness (2) to all four glow plugs (1).
- Install fuel rail. Refer to RAIL, FUEL, INSTALLATION .
- On 4x4 models, install the front axle. Refer to INSTALLATION .
- Install the belly pan.
- Lower the vehicle.
- Install the bolt securing high pressure feed tube at intake manifold. Tighten bolt to 15 N.m (133 in. lbs.).
- Install the generator. Refer to GENERATOR, INSTALLATION .
- Install the battery.
- Connect the positive battery cable.
- Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
- Connect air tube from air control valve and securely tighten clamp.
- Install the engine silencer and securely tighten the four retainers.
- Install the engine cover.
- Connect negative battery cable.