2.2L Diesel EGT Sensor 1/4

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Remove the belly pan. Refer to BELLY PAN, REMOVAL .

Fig 1: EGT Sensor 1/4 Wire Harness Connectors
Courtesy of CHRYSLER GROUP, LLC
Disconnect the Exhaust Gas Temperature (EGT) sensor 1/4 wire harness connector (1) and detach the connector from bracket.

Fig 2: Retainer Clip
Courtesy of CHRYSLER GROUP, LLC
Open the retaining clip and remove the wires from retainer clip (1).

Fig 3: EGT Sensor 1/4
Courtesy of CHRYSLER GROUP, LLC
Remove the EGT sensor 1/4 (1) from the Diesel Oxidation Catalyst (DOC)/Diesel Particulate Filter (DPF).