LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Cherokee Sport, Eng CD ED8, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System - Service Information >> Tray, Battery >> Installation >> Gas

Tray, Battery: Installation: Gas

  1. Position the battery tray onto the frame rail.
    Fig 1: Upper Battery Tray Bolts
    GC0169920Courtesy of CHRYSLER GROUP, LLC
  2. Loosely install the upper battery tray bolts (1).
    Fig 2: Bolts & Guide Retainer
    GC0169928Courtesy of CHRYSLER GROUP, LLC
  3. Install the two bolts (1) that secure the battery tray to the inner frame rail.
  4. Install the hood cable and guide retainer (2).
    Fig 3: Battery Tray To Frame Bottom Side Bolt
    GC0170006Courtesy of CHRYSLER GROUP, LLC
  5. Install the battery tray to frame bottom side bolt (1).
    Fig 4: Battery Tray To Washer Solvent Bottle Bolt
    GC0170003Courtesy of CHRYSLER GROUP, LLC
  6. Install the bolt that secures the washer solvent bottle to the battery tray (1).
  7. Install the inner splash shield (1). Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
  8. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  9. Tighten the upper battery tray bolts.
  10. Install the wiring harness onto the battery tray.
  11. Install the Powertrain Control Module. Refer to MODULE, POWERTRAIN CONTROL, INSTALLATION .
  12. Install the battery onto the battery tray. Refer to BATTERY, INSTALLATION .
scientia non olet · About LEMON Manuals