LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Cherokee Sport, Eng CD ED8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Blind Spot >> Removal >> Removal

Module, Blind Spot: Removal: Removal

Fig 1: Blind Spot Sensor, Latch Tabs & Harness Connector
GC0155052Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Reach up behind the outboard end of the rear bumper fascia to access and disconnect the rear bumper fascia wire harness connector (4) from the Left Blind Spot Sensor (LBSS) or Right Blind Spot Sensor (RBSS) (3) connector receptacle.
  3. Disengage the latch tabs (2) of the BSM sensor mounting bracket and pull the LBSS or RBSS out of the bracket.
scientia non olet · About LEMON Manuals