LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Cherokee Limited, 3.2L Eng VIN S, AWD, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System (Service Information) >> Sensor, Knock >> Removal >> 2.4L

Sensor, Knock: Removal: 2.4L

Fig 1: Knock Sensor Mounting Bolt
GC0155838Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the exhaust manifold. Refer to MANIFOLD, EXHAUST, REMOVAL .
  3. Remove the knock sensor electrical connector.
  4. Remove the mounting bolt (1) and knock sensor.
scientia non olet · About LEMON Manuals