LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2015 >> Cherokee Limited, 3.2L Eng VIN S, AWD, Automatic T/Case Control >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Exhaust Temperature >> Installation >> 2.2L Diesel EGT Sensor 1/3

2.2L Diesel EGT Sensor 1/3

Fig 1: EGT Sensor 1/3
GC0169935Courtesy of CHRYSLER GROUP, LLC
  1. Install the Exhaust Gas Temperature (EGT) sensor 1/3 into the Diesel Oxidation Catalyst (DOC)/Diesel Particulate Filter (DPF) (5) and tighten to the proper specification. Refer to SPECIFICATIONS .
    Fig 2: EGT Sensor Connectors
    GC0169912Courtesy of CHRYSLER GROUP, LLC
  2. Attach the EGT sensor 1/3 wire to the retainer.
  3. Attach the connector (4) to the bracket and connect the EGT sensor 1/3 wire harness connector (1).
  4. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals