2.0L Diesel

Fig 1: Removing/Installing Starter

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Remove bolts (3) and the belly pan (2).

Fig 2: Accessory Drive Belt - 2.0L Diesel
Courtesy of CHRYSLER GROUP, LLC
Remove the accessory drive belt (1). Refer to BELT, SERPENTINE, REMOVAL .

Fig 3: B+ Retainer, Generator Field Connector & B+ Cable
Courtesy of CHRYSLER GROUP, LLC
Remove the Power Transfer Unit (PTU). Refer to REMOVAL .
Remove the engine oil cooler. .
Remove the B+ nut (2).
Disconnect the generator field connector (1) and position aside the B+ cable (3).

Fig 4: Generator Rear Support Bracket Retainer, Upper Generator Mounting Retainer & Lower Generator Mounting Retainer
Courtesy of CHRYSLER GROUP, LLC
Loosen the upper generator rear support bracket bolt (1) (not necessary to remove).
Remove bolts (2, 3) and the generator.