LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sport, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Electronic Control Modules (Service Information)) >> Module, Glow Plug >> Removal >> Removal >> Right Hand Drive

Right Hand Drive

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Glow Plug Relay (Right Hand Drive)
GC0130774Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Disconnect the negative battery cable.
  2. Carefully remove mounting pin (2).
  3. Disconnect the wire harness connector (4) from the glow plug module.
scientia non olet · About LEMON Manuals