LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Sensor, Active Damping >> Installation >> Front

Sensor, Active Damping: Installation: Front

Fig 1: Terminal Locking Tab, Wiring Harness Connector & Sensor Retaining Bolt
GC0153849Courtesy of CHRYSLER GROUP, LLC
  1. Position the sensor, install the sensor retaining bolt (3) and tighten to 9 N.m (80 in. lbs.).
  2. Connect the wiring harness connector (2).
  3. Seat the terminal locking tab (1).
  4. Remove the supports and lower the vehicle.
scientia non olet · About LEMON Manuals