Sensor, Crankshaft Position: Installation: Installation

Fig 1: Crankshaft Position Sensor & Bolt

Courtesy of CHRYSLER GROUP, LLC

1. Clean the area and bore around Crankshaft Position Sensor (CKP).
2. Install the CKP (2). Tighten bolt (1) to 6 N.m (53 in. lbs.).
   Fig 2: Crankshaft Position Sensor Wiring Harness Bracket & Bolts

   Courtesy of CHRYSLER GROUP, LLC
3. Install bolts (1) attaching the harness connector bracket (2) to oil pan and tighten to 8 N.m (71 in. lbs.).
   Fig 3: Crankshaft Position Sensor Connector

   Courtesy of CHRYSLER GROUP, LLC
4. Connect the CKP harness connector (1).
5. Install the flex plate. Refer to FLEXPLATE, INSTALLATION, 3.0L TURBO DIESEL .
6. Connect the negative battery cable.