LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Sport, 2.4L Eng VIN B, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Exhaust System) >> Differential Pressure Sensor >> Installation >> Installation

Differential Pressure Sensor: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolt & Pressure differential Sensor
GC0138495Courtesy of CHRYSLER GROUP, LLC
  1. Install pressure differential sensor (2). Tighten bolt (1) to 10 N.m (89 in. lbs.).
    Fig 2: Identifying Pressure Differential Sensor, Harness Connector & Vacuum Lines
    GC0138494Courtesy of CHRYSLER GROUP, LLC
  2. Connect the pressure differential sensor (1) vacuum lines (3).
  3. Connect the pressure differential sensor (1) harness connector (2).
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals