LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 ((Transmission Control Module (TCM) - Electrical Diagnostics - CVT Automatic Transmission)) >> DTC Troubleshooting >> P0717-Input Speed Sensor 1 Circuit No Signal >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

Condition one:  Input speed RPM is less than 150 RPM with a Output speed RPM greater than 1000 RPM for the period of 5 seconds.

Condition two:  Input speed RPM last value is greater than 1000 RPM where as the Input speed RPM current value is zero RPM for the period of 500 msec.

Condition three:  Both the Input and Output Speed sensors are less than 150 RPM with a actual vehicle speed greater than 10 Km/h. (Note: this is an indication of either the power supply to both sensors is open or the C106 connector is disconnected.)

scientia non olet · About LEMON Manuals