LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 ((Transmission Control Module (TCM) - Electrical Diagnostics - Continuously Variable Transmission (CVT))) >> DTC Troubleshooting >> P0730-Incorrect Gear Ratio >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

If the difference between the transmission estimated pulley speed and the measured primary pulley speed is greater than 1000 rpm (belt slipping) for the continuous period of 5.0 seconds.

scientia non olet · About LEMON Manuals