Section 231 (Audio/Video/Entertainment/Connectivity (Service Information)): Radio: Installation: Installation
WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the wire harness connectors and antenna cable to radio.
- Insert radio into instrument panel.
- Install mounting fasteners. Tighten to 2 N.m (20 in. lbs.).
- Install instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
- Connect battery negative cable.
- If radio is equipped with an internal hard disk drive (HDD), restore user data from backup. Refer to STANDARD PROCEDURE .