Section 134 (Steering System): Pump: Removal: 3.7L
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Siphon out as much power steering fluid as possible.
1 - MOUNTING BOLTS 2 - RESERVOIR 3 - STEEL PULLEY - Remove the serpentine drive belt. Refer to BELT, SERPENTINE, REMOVAL .
- Remove the power steering high pressure hose at the pump.
- Remove the return hose at the pump.
- Remove the three bolts (1) securing the pump to the engine through the holes in the pulley (3).
- Remove the pump from the vehicle.