Seals, End Cover: Installation: Installation

Fig 1: Installing Carrier Cover Inner Seal

Courtesy of CHRYSLER GROUP, LLC

1. Install the inner seal into the PTU cover using Installer (special tool #9852, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
   Fig 2: Installing Carrier Cover Outer Seal

   Courtesy of CHRYSLER GROUP, LLC
2. Install the outer seal into the PTU cover using Installer (special tool #9853, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
   Fig 3: Side Cover Bolts

   Courtesy of CHRYSLER GROUP, LLC
3. Install the side cover.
4. Tighten side cover bolts (1) to 23 N.m (17 ft. lbs.).
5. Install the right halfshaft. Refer to INSTALLATION .