LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Accessory Drive >> TENSIONER, Belt >> Removal >> Diesel Engine

Diesel Engine

Fig 1: Tensioner Bracket Mounting Bolts
GC0137781Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  2. Lower the vehicle.
  3. Remove the tensioner bracket mounting bolts (1, 2 3).
  4. Raise and support the vehicle.
  5. Remove the tensioner assembly (4) from underneath the vehicle.
  6. If idler pulley is to be replaced, remove pulley from tensioner (4).
scientia non olet · About LEMON Manuals