LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (CVT Automatic Transmission (Service Information)) >> Shifter, Transmission >> Installation >> Installation

Shifter, Transmission: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the shifter in place.
  2. Clip the shift cable to the shifter.
    Fig 1: Shifter Hold Down Bolts
    GC0084589Courtesy of CHRYSLER GROUP, LLC
  3. Install the shifter bolts and tighten to 6 N.m (53 ft. in lbs.).
  4. Attach interlock cable to shifter.
  5. Connect the shifter harness connector.
  6. Install shifter housing. Refer to HOUSING, SHIFTER, INSTALLATION .
scientia non olet · About LEMON Manuals