Diagnostic Test
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- TEST FOR INTERMITTENT CONDITION
- Turn the ignition on.
- With the scan tool, record and erase DTCs
- Operate the RKE transmitter in all positions several times.
- With the scan tool, read DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace the RKE transmitter battery and retry the system. If the DTC returns, replace and program the RKE transmitter in accordance with Service Information.
- Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure .
No
- The conditions that caused this code to set are not present at this time.
- Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure .