Module, Final Drive Control: Operation: Operation: Notes
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
During normal operation of an active transfer case the FDCM control module learns and remembers the Clutch Engagement Point (Kiss Point), the position in the motor actuator's travel where torque begins to be transferred to the front wheels. The position is read out using the encoder as a 0 to 5 volt signal. This information is written into the module's EEPROM area at Ignition OFF. Over time the clutch pack wears and the Kiss Point changes in one direction (going from a lower voltage to a higher value).