LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Battery System - Service Information) >> Cover, Battery, THERMOGUARD >> Installation >> Installation

Cover, Battery, THERMOGUARD: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

When replacing battery, the thermal guard MUST be transferred to the new battery.

  1. Slip the battery thermal guard over the battery being careful not to tear it.
  2. Install the battery into the vehicle. Refer to BATTERY, INSTALLATION .
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals