LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Wireless Control Module (WCM) - Electrical Diagnostics) >> DTC Troubleshooting >> B1A0F-RKE Fob 8 Performance >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. TEST FOR INTERMITTENT CONDITION 
    1. Put the key in the ignition and turn the ignition on.
    2. With the scan tool, record and erase DTCs
    3. Operate the RKE transmitter in all positions several times.
    4. With the scan tool, read DTCs.

      Does the scan tool display this code as active?

      Yes 

      No 

      • The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore cause the RKE system to be inoperative.
      • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE - BODY VERIFICATION TEST .