LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 ((Transmission Control Module (TCM) - Electrical Diagnostics - 6F24 Automatic Transmission)) >> DTC Troubleshooting >> P0721-00-Output Shaft Speed Sensor Circuit Performance >> When Monitored

When Monitored

WARNING: This page is about a different variant/trim than selected.

Battery supply voltage is greater than or equal to 9 volts.

Driving Conditions for stuck failure: 

Input speed is equal to 0 RPM.

Engine speed is greater than 400 RPM.

Shift lever position is in Drive.

Vehicle speed received from the BSM is greater than or equal to 50 km/h (31 mph).

scientia non olet · About LEMON Manuals