LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Fuel System) >> Fuel Delivery, 2.8L Diesel >> Relay, Fuel Heater >> Installation >> Installation

Relay, Fuel Heater: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fuel Heater Relay & Electrical Connector
GC0085649Courtesy of CHRYSLER GROUP, LLC

The fuel heater relay (1) is located in the left/rear of the engine compartment.

  1. Check condition of relay connector pins for corrosion, etc.
  2. Position relay and install mounting bolt.
  3. Connect electrical connector (2) to relay.
  4. Connect negative battery cable to battery.